Archive for Term: Prosthetic & Appliances

Products 1 - 10 from 69. Products on page
  • Glatzan Bald Cap
    £24.00

    Glazan Bald Cap er en specielt tynd, men holdbar plast bald cap, fremstillet af det flydende bald cap materiale Glatzan. Denne bald cap fås i 2 størrelser små og store. Glatzan Bald Cap placeres på modellen og er skåret til så den passer til hovedet. Kanterne sikres derefter med Mastix Spirit Gum, begynd med panden, derefter nakken, og endelig i tindingerne og i ørerne. Når den sidder rigtigt, kan kanterne glattes ud med fortykket latex eller klæbemiddel (til øjenvipper), inden makeup'en påføres. Selv om enhver make-up kan bruges, anbefaler vi specielt fedtfarver til gummiartikler. Som sidste trin anvendes Translucent Powder omhyggeligt på makeup'en.

  • Grimas Artificial Eye 102 (Grey) grey 27 mm
    £5.10

    Grimas Artificial Eye is an artificial plastic eye that can be used for various effects. The Artificial Eye is sold in individual boxes. Grimas Artificial Eye is available in blue, brown, green and grey. Procedure It can be used in combination with Grimas Derma Wax or a latex Quasimodo eye patch (Grimas Latex Prostetics number 405). The artificial eye can be finished with all forms of Grimas make-up. Cleaning Artificial Eye can be washed with water and soap.

  • Grimas Artificial Eye 301 (Blue) Blue 27 mm
    £5.10

    Grimas Artificial Eye is an artificial plastic eye that can be used for various effects. The Artificial Eye is sold in individual boxes. Grimas Artificial Eye is available in blue, brown, green and grey. Procedure It can be used in combination with Grimas Derma Wax or a latex Quasimodo eye patch (Grimas Latex Prostetics number 405). The artificial eye can be finished with all forms of Grimas make-up. Cleaning Artificial Eye can be washed with water and soap.

  • Grimas Artificial Eye 401 Green 27 mm
    £5.10

    Grimas Artificial Eye is an artificial plastic eye that can be used for various effects. The Artificial Eye is sold in individual boxes. Grimas Artificial Eye is available in blue, brown, green and grey. Procedure It can be used in combination with Grimas Derma Wax or a latex Quasimodo eye patch (Grimas Latex Prostetics number 405). The artificial eye can be finished with all forms of Grimas make-up. Cleaning Artificial Eye can be washed with water and soap.

  • Grimas Baldcap
    £22.99

    Grimas Bald Cap is a single-use, transparent, elastic plastic bald cap for use in film, TV and theatre. The Bald Cap is available in a single size and is sold individually.

  • Grimas Fake eye 27mm
    £5.10

    Grimas Artificial Eye is an artificial plastic eye that can be used for various effects. The Artificial Eye is sold in individual boxes.  Grimas Artificial Eye is available in blue, brown, green and grey.
    Procedure  It can be used in combination with Grimas Derma Wax or a latex Quasimodo eye patch (Grimas Latex Noses and Sets number 13). The artificial eye can be finished with all forms of Grimas make-up.Cleaning  Artificial Eye can be washed with water and soap.

  • Grimas Latex prostetics 100 Clown's nose
    £13.00

    Grimas Latex Prosthetics are rubber noses, snouts, horns, ears and chins. They are used for the theatre, carnival, film and television. When used properly, the latex prostetics can be re-used several times. Procedure Take the latex prostetic out of the box and place it on the skin to get an impression of whether the edges are a good fit and where it is soon going to be glued on. Everything that is going to be coloured in a skin tone - except for the edges - must be pre-coloured slightly with red to suggest naturally perfused skin. To do this, apply a red Grimas Eyeshadow/Rouge using a Make-up Sponge or Powder Rouge Brush. Then use a sponge to apply a covering layer of Grimas Camouflage Make-up Pure in the desired skin tone. Work directly from the stick or spatula. If you want to give the latex prostetic a brighter colour, use Grimas Cr?me Make-up Pure. Don't use Cr?me Make-up Pure for skin tones, but use Grimas Camouflage Make-up Pure. Put a piece of wadding in the nose to maintain its shape and to absorb perspiration. Apply a little Grimas Mastix Extra to the inside of the scales/adhesive edge and allow it to dry for a few seconds. Allow the glue to dry for 15 seconds and then place the latex prostetic back on the skin. Use a pin-tail comb to hold the scaly edges properly in place and glue them straight. Press the edges down firmly with a tissue. To get a smooth transition between the latex prostetic and the skin, even the edges off as follows: apply a thin line of eyelash adhesive to the edge of a sponge and dab this over the transition between the latex prostetic and the skin. Allow to dry with help of a hairdryer until the result is transparent. Repeat this process until a nice and even transition is obtained. Colour the edges of the transition with the colour being used. Powder it all off with Grimas Transparent Powder or Fixing Powder and then remove any excess powder. Removal Detach the adhesive edge with a cotton bud soaked in Grimas Mastix Remover. Remove the adhesive and make-up residues from the latex prostetic with Mastix Remover. Massage Grimas Multi Remover Pure or Cleansing Cream into the skin and remove with a tissue. Cleanse the skin afterwards with Grimas Cleansing Lotion. Clean the latex prostetic afterwards using water and soap, and powder it with Grimas Transparent Powder after drying (with a dryer, if necessary). Keep in a dark place.

  • Grimas Latex prostetics 100L Clown's nose large
    £15.00

    Grimas Latex Prosthetics are rubber noses, snouts, horns, ears and chins. They are used for the theatre, carnival, film and television. When used properly, the latex prostetics can be re-used several times. Procedure Take the latex prostetic out of the box and place it on the skin to get an impression of whether the edges are a good fit and where it is soon going to be glued on. Everything that is going to be coloured in a skin tone - except for the edges - must be pre-coloured slightly with red to suggest naturally perfused skin. To do this, apply a red Grimas Eyeshadow/Rouge using a Make-up Sponge or Powder Rouge Brush. Then use a sponge to apply a covering layer of Grimas Camouflage Make-up Pure in the desired skin tone. Work directly from the stick or spatula. If you want to give the latex prostetic a brighter colour, use Grimas Cr?me Make-up Pure. Don't use Cr?me Make-up Pure for skin tones, but use Grimas Camouflage Make-up Pure. Put a piece of wadding in the nose to maintain its shape and to absorb perspiration. Apply a little Grimas Mastix Extra to the inside of the scales/adhesive edge and allow it to dry for a few seconds. Allow the glue to dry for 15 seconds and then place the latex prostetic back on the skin. Use a pin-tail comb to hold the scaly edges properly in place and glue them straight. Press the edges down firmly with a tissue. To get a smooth transition between the latex prostetic and the skin, even the edges off as follows: apply a thin line of eyelash adhesive to the edge of a sponge and dab this over the transition between the latex prostetic and the skin. Allow to dry with help of a hairdryer until the result is transparent. Repeat this process until a nice and even transition is obtained. Colour the edges of the transition with the colour being used. Powder it all off with Grimas Transparent Powder or Fixing Powder and then remove any excess powder. Removal Detach the adhesive edge with a cotton bud soaked in Grimas Mastix Remover. Remove the adhesive and make-up residues from the latex prostetic with Mastix Remover. Massage Grimas Multi Remover Pure or Cleansing Cream into the skin and remove with a tissue. Cleanse the skin afterwards with Grimas Cleansing Lotion. Clean the latex prostetic afterwards using water and soap, and powder it with Grimas Transparent Powder after drying (with a dryer, if necessary). Keep in a dark place.

  • Grimas Latex prostetics 101 Boxer's nose
    £15.00

    Grimas Latex Prosthetics are rubber noses, snouts, horns, ears and chins. They are used for the theatre, carnival, film and television. When used properly, the latex prostetics can be re-used several times. Procedure Take the latex prostetic out of the box and place it on the skin to get an impression of whether the edges are a good fit and where it is soon going to be glued on. Everything that is going to be coloured in a skin tone - except for the edges - must be pre-coloured slightly with red to suggest naturally perfused skin. To do this, apply a red Grimas Eyeshadow/Rouge using a Make-up Sponge or Powder Rouge Brush. Then use a sponge to apply a covering layer of Grimas Camouflage Make-up Pure in the desired skin tone. Work directly from the stick or spatula. If you want to give the latex prostetic a brighter colour, use Grimas Cr?me Make-up Pure. Don't use Cr?me Make-up Pure for skin tones, but use Grimas Camouflage Make-up Pure. Put a piece of wadding in the nose to maintain its shape and to absorb perspiration. Apply a little Grimas Mastix Extra to the inside of the scales/adhesive edge and allow it to dry for a few seconds. Allow the glue to dry for 15 seconds and then place the latex prostetic back on the skin. Use a pin-tail comb to hold the scaly edges properly in place and glue them straight. Press the edges down firmly with a tissue. To get a smooth transition between the latex prostetic and the skin, even the edges off as follows: apply a thin line of eyelash adhesive to the edge of a sponge and dab this over the transition between the latex prostetic and the skin. Allow to dry with help of a hairdryer until the result is transparent. Repeat this process until a nice and even transition is obtained. Colour the edges of the transition with the colour being used. Powder it all off with Grimas Transparent Powder or Fixing Powder and then remove any excess powder. Removal Detach the adhesive edge with a cotton bud soaked in Grimas Mastix Remover. Remove the adhesive and make-up residues from the latex prostetic with Mastix Remover. Massage Grimas Multi Remover Pure or Cleansing Cream into the skin and remove with a tissue. Cleanse the skin afterwards with Grimas Cleansing Lotion. Clean the latex prostetic afterwards using water and soap, and powder it with Grimas Transparent Powder after drying (with a dryer, if necessary). Keep in a dark place.

  • Grimas Latex prostetics 102 Clown's nose
    £13.00

    Grimas Latex Prosthetics are rubber noses, snouts, horns, ears and chins. They are used for the theatre, carnival, film and television. When used properly, the latex prostetics can be re-used several times. Procedure Take the latex prostetic out of the box and place it on the skin to get an impression of whether the edges are a good fit and where it is soon going to be glued on. Everything that is going to be coloured in a skin tone - except for the edges - must be pre-coloured slightly with red to suggest naturally perfused skin. To do this, apply a red Grimas Eyeshadow/Rouge using a Make-up Sponge or Powder Rouge Brush. Then use a sponge to apply a covering layer of Grimas Camouflage Make-up Pure in the desired skin tone. Work directly from the stick or spatula. If you want to give the latex prostetic a brighter colour, use Grimas Cr?me Make-up Pure. Don't use Cr?me Make-up Pure for skin tones, but use Grimas Camouflage Make-up Pure. Put a piece of wadding in the nose to maintain its shape and to absorb perspiration. Apply a little Grimas Mastix Extra to the inside of the scales/adhesive edge and allow it to dry for a few seconds. Allow the glue to dry for 15 seconds and then place the latex prostetic back on the skin. Use a pin-tail comb to hold the scaly edges properly in place and glue them straight. Press the edges down firmly with a tissue. To get a smooth transition between the latex prostetic and the skin, even the edges off as follows: apply a thin line of eyelash adhesive to the edge of a sponge and dab this over the transition between the latex prostetic and the skin. Allow to dry with help of a hairdryer until the result is transparent. Repeat this process until a nice and even transition is obtained. Colour the edges of the transition with the colour being used. Powder it all off with Grimas Transparent Powder or Fixing Powder and then remove any excess powder. Removal Detach the adhesive edge with a cotton bud soaked in Grimas Mastix Remover. Remove the adhesive and make-up residues from the latex prostetic with Mastix Remover. Massage Grimas Multi Remover Pure or Cleansing Cream into the skin and remove with a tissue. Cleanse the skin afterwards with Grimas Cleansing Lotion. Clean the latex prostetic afterwards using water and soap, and powder it with Grimas Transparent Powder after drying (with a dryer, if necessary). Keep in a dark place.