Archive for Term: Prosthetic Making & Casting

Products 1 - 10 from 36. Products on page
  • CHAVANT CLAY 2LB BLOCKS NSP HARD
    £ 16.99

    CHAVANT CLAY 2LB BLOCKS NSP HARD

  • CHAVANT CLAY 2LB BLOCKS NSP MEDIUM
    £ 16.99

    CHAVANT CLAY 2LB BLOCKS NSP MEDIUM

  • CHAVANT CLAY 2LB BLOCKS NSP SOFT
    £ 16.99

    CHAVANT CLAY 2LB BLOCKS NSP SOFT

  • Chavant Modeling Clay 2lb block Le Beau Touche
    £ 16.99

    Chavant Modeling Clay 2lb block Le Beau Touche

  • Chavant N.S.P Brown Clay
    £ 14.99

    Chavant NSP is the most popular choice for prosthetics sculpture. It is wax based and melts well at low temperatures until fluid enough to pour or brush in to moulds. Chavant NSP is available in soft, medium and hard.

  • Flocking Colour Additive
    £ 12.48

    Flocking er et ekstra farveadditiv lavet af meget fine polyamidfibre. Dette produkt er egnet til at simulere en naturlig hudfarve. Tilsæt en lille mængde flocking til Artex, Gel-Foam eller andre transparente eller halvgennemsigtige præparater for at skabe et fint mønster af huden.

    PRODUKTKODE: 06080/00 Details: 50 g

  • Flocking Colour Additive Shaker
    £ 5.52

    PRODUKTKODE: 06081/00

    Flocking er et ekstra farveadditiv lavet af meget fine polyamidfibre. Dette produkt er egnet til at simulere en naturlig hudfarve. Tilsæt en lille mængde flocking til Artex, Gel-Foam eller andre transparente eller halvgennemsigtige præparater for at skabe et fint mønster af huden.

  • Glatzan L 1000ml
    £ 81.36

    Glatzan L er et flydende syntetisk materiale til dannelse af ultra-tynde bald caps. I et godt ventileret rum påføres Glatzan tyndt og ensartet med pensel på hovedformen og får lov til at tørre. Efter at overfladen er tørret, skal denne procedure gentages mindst tre gange for at nå den ønskede materialetykkelse. De ydre grænser af hætten skal dog bestå af kun 1 eller 2 lag, for at give en særlig tynd kant for flotte overgange. Efter påføring af det sidste lag skal hætten have lov til at tørre helt igennem (i 6-12 timer). Den kan derefter grundigt pudret og forsigtigt fjernes fra hovedformen. Fjernelsesprocessen skal starte ved nakken og derefter langsomt fortsætte i retning mod panden. bald caps skabt på denne måde bør kun bruges, efter at dampene er fuldstændigt fordampet, og efter der er ingen stærkt mærkbar lugt af opløsningsmiddel.

  • Kryolan Cold Foam SF
    £ 49.45

    Cold Foam SF is a fine-pore polyurethane foam consisting of 2 components, with good skin structure for facial and body appliances, for 3-dimensional mask effects. Cold Foam is a reaction foam that reaches a volume 5 to 6 times its original size. The set consists of the 2 components and a release agent. Separately weigh out the correct amounts of the base component and the reaction component. Then, use a disposable cup to manually mix these two components quickly and thoroughly. Next, immediately pour the finished mixture into a mold onto which a separator agent has been carefully applied. The mold must then be immediately closed and fastened shut with a screw clamp or with fastening straps. After 45 to 60 minutes, the mold can be opened and the foam appliances can be removed from the mold after thorough powdering. Cold Foam SF appliances are bonded in place with Spirit Gum or Pros-Aide. Details: 500 ml + 175 ml + 100 ml

  • Kryolan Flocking Additive Color
    £ 3.50£ 9.99

    Flocking is an additional color additive made from very fine polyamide fibers. This product is suitable to simulate a natural skin complexion. Add a little amount of Flocking into Artex, Gel-Foam or other transparent or semi-transparent carriers in order to create fine veining of the skin.